AudioRoundTable.com: General » how to use a multimeter when installing car audio system?

Home » Audio » General » how to use a multimeter when installing car audio system?

Mon, 06 July 2009 00:46

euphonics
Messages: 1
Registered: July 2009

Esquire

You can check the ground using this link...
http://www.the12volt.com/installbay/forum_posts.asp~TID~49445~PN~1

You can set your gain by using these links...
http://mobile.jlaudio.com/support_pages.php?page_id=143
http://www.thesuicidaleggroll.com/gain.htm

You can check the voltage at an amplifier by measuring across the power and ground cable. It should be around 13-14.4 volts at the amp when the car is running.

Good Luck!!!

		how to use a multimeter when installing car audio system? By: audiophile on Mon, 06 July 2009 00:15
		Re: how to use a multimeter when installing car audio system? By: music on Mon, 06 July 2009 00:42
		Re: how to use a multimeter when installing car audio system? By: euphonics on Mon, 06 July 2009 00:46

Previous Topic:	Can you Help? Audio amp wire routing.?
Next Topic:	Welcome to Crescendo Systems!

Goto Forum:

] [

]

Current Time: Mon Jul 29 11:16:48 CDT 2024