| Re: JBL 2035HPL T/S parameters [message #59308 is a reply to message #19598] |
Thu, 28 May 2009 10:30   |
spkrman57
Messages: 522
Registered: May 2009
|
Illuminati (1st Degree) |
|
|
Just thought I would report that I have installed these drivers in 3 cu ft cabs tuned to 41hz and they play rather nicely.
Crossover is 4-Pi original (single coil on LF driver) which I have increased to 3.6mH to mesh well with my EV DH1-A 2" compression drivers on 350hz Edgar salad bowl tractix horns.
I used 18db att/EQ (12.5 ohm and 56 ohm - .33 ufd cap) I also had to add a damping resistor of 33 ohms across the EV comp driver to tame the titanium diaphram.
The speakers are powered by 300B triode amp @ 8 wpc.
I would attach pics of my system, but I've been unable to find out how to post them from my pc(???)
Regards, Ron
|
|
|
|
Posting Rules
Members
Search
Help
Register
Login
Get a T-Shirt!
