Home » Sponsored » Pi Speakers » Alpha 10 modeling
Re: Alpha 10 modeling [message #53436 is a reply to message #53435] Fri, 17 April 2009 16:37 Go to previous messageGo to previous message
Wayne Parham is currently offline  Wayne Parham
Messages: 18787
Registered: January 2001
Illuminati (33rd Degree)

In the tower two π loudspeaker, f3 is about 40Hz and f10 is about 30Hz. You can safely run the full 100 watts throughout the passband.

You could use the Alpha 10 in a larger box with an EBS alignment to get deeper extension. But excursion will limit your bass output in a large box, so be sure to limit the power below 100Hz. Excursion will become excessive in a 10ft3 cabinet at about half the power of a 5ft3 box.

 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: 1 Pi Plans
Next Topic: 1 π plans
Goto Forum:
  


Current Time: Fri Nov 22 21:35:32 CST 2024

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Miller Audio
Miller Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest