AudioRoundTable.com: Pi Speakers » cardboard port for 4Pi?

Home » Sponsored » Pi Speakers » cardboard port for 4Pi?

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: cardboard port for 4Pi? [message #53324 is a reply to message #53323]

Thu, 19 March 2009 21:40

Matts
Messages: 359
Registered: May 2009

Grand Master

when I made mine I got some lighter baltic birch plywood made for models at Michael's, I guess about 1/4" or maybe 3/8" and used that for the port. It was real easy to work with and I used masking tape to hold it together while the glue dried. Just butt joints, as Wayne said. I spray painted the inside of it flat black before gluing it on the back of the baffle, also gave the cutout on the baffle a touch of flat black on the inside edge.

Report message to a moderator

[Message index]

		cardboard port for 4Pi? By: reguax on Thu, 19 March 2009 12:00
		Re: cardboard port for 4Pi? By: Wayne Parham on Thu, 19 March 2009 13:25
		Re: cardboard port for 4Pi? By: reguax on Thu, 19 March 2009 13:33
		Re: cardboard port for 4Pi? By: Wayne Parham on Thu, 19 March 2009 14:00
		Re: cardboard port for 4Pi? By: reguax on Thu, 19 March 2009 15:16
		Re: cardboard port for 4Pi? By: Wayne Parham on Thu, 19 March 2009 16:08
		Re: cardboard port for 4Pi? By: reguax on Thu, 19 March 2009 16:34
		Re: cardboard port for 4Pi? By: Matts on Thu, 19 March 2009 21:40

Previous Topic:	Waveguides verses Horns
Next Topic:	2" compression drivers

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Tue Feb 18 05:18:09 CST 2025