Home » Sponsored » Pi Speakers » I will check the cables first...I will check the cables first...I will check the cables first...
Re: Don't ask? [message #52560 is a reply to message #52557] Sun, 31 August 2008 06:12 Go to previous messageGo to previous message
Bill Epstein is currently offline  Bill Epstein
Messages: 1088
Registered: May 2009
Location: Smoky Mts. USA
Illuminati (2nd Degree)
Hardly compelling; discovering a ground fault hum when first powering up Friday, I went after the known loose RCA females attached to the Faraday cage of my tonearm. 4 hours later, I can now field-strip an SME III in the dark but everything is OK except I can discern no way to tighten the crimp-on connectors to the cage.

Turning to the phono IC's, I discover no continuity for the right channel neutral in about 10 seconds and fix it in 10 minutes.

As others have reported, the Eichmann Bullet neutral pin is fragile and had broken right where it inserts into the plastic collar. I "glued" it back together with solder so expect it to fail again. No more Eichmanns for me.

 
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Woofer for Econowave
Next Topic: 2-Pi BASS ???
Goto Forum:
  


Current Time: Wed Aug 07 22:01:47 CDT 2024

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Miller Audio
Miller Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest