AudioRoundTable.com: Pi Speakers

Home » Sponsored » Pi Speakers » Gaskets

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Gaskets [message #51946]

Fri, 28 March 2008 20:30

Wayne Parham
Messages: 18737
Registered: January 2001

Illuminati (33rd Degree)

The PVC plastic used to make shower pans makes a great gasket material. Cardboard works pretty well too.

It's easy to make gaskets. Just draw an outline of the part with a pen, and also make a mark where mounting holes are.

http://www.pispeakers.com/misc/pcb_gasket_outline.jpg

Drawing an outline of the crossover PCB to make a gasket

Next, cut the gasket out and make holes for screws with a hole punch.

http://www.pispeakers.com/Basshorn/Cutting_Gasket.jpg

Cutting out a gasket

You can make gaskets for drivers, horns, crossover PCB's, Zobel resistors, access panels, whatever you need. It is very easy to do.

http://www.pispeakers.com/misc/gaskets.jpg

Gasket set for a four π loudspeaker

Report message to a moderator

[Message index]

		Gaskets By: Wayne Parham on Fri, 28 March 2008 20:30
		Re: nice looking xover! By: Matts on Fri, 28 March 2008 23:12
		Re: nice looking xover! By: Wayne Parham on Sat, 29 March 2008 00:33
		Re: Gaskets By: Shane on Sat, 29 March 2008 00:12
		Re: Gaskets By: Wayne Parham on Sat, 29 March 2008 00:35
		Re: Gaskets By: Bill Epstein on Sun, 30 March 2008 04:23
		Re: Gaskets By: Wayne Parham on Sun, 30 March 2008 22:37

Previous Topic:	wood horn
Next Topic:	No size limit on HT subwoofer, help please

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Mon Jul 29 21:02:12 CDT 2024