AudioRoundTable.com: Pi Speakers » Wayne, crossover and L-pad confusion

Home » Sponsored » Pi Speakers » Wayne, crossover and L-pad confusion

Wed, 27 February 2008 15:07

Kim Schultz
Messages: 85
Registered: May 2009

Viscount

Thx, will look into that phase thing tomorrow.

Can you give me the new component values for the crossover, then I´ll try it out and make some new measurements tomorrow.

What is the sonic difference between the old and the new crossover ?

		Wayne, crossover and L-pad confusion By: Bill Epstein on Sun, 24 February 2008 14:48
		Top octave augmentation for compression horn tweeters By: Wayne Parham on Sun, 24 February 2008 16:54
		Re: OK, I'll quit re-inventing the wheel By: Bill Epstein on Sun, 24 February 2008 17:18
		Never! By: Wayne Parham on Sun, 24 February 2008 18:05
		Re: Pi Align strikes again! By: Bill Epstein on Tue, 26 February 2008 04:58
		Re: Upon further review By: Bill Epstein on Tue, 26 February 2008 12:10
		Re: Upon further review By: Wayne Parham on Wed, 27 February 2008 11:55
		What about 16ohm drivers By: Kim Schultz on Tue, 26 February 2008 14:18
		Correction By: Kim Schultz on Wed, 27 February 2008 03:40
		Now with measurements. By: Kim Schultz on Wed, 27 February 2008 07:04
		Re: Now with measurements. By: Wayne Parham on Wed, 27 February 2008 12:48
		Spice rules ;-) By: Kim Schultz on Wed, 27 February 2008 14:03
		Re: Spice rules ;-) By: Wayne Parham on Wed, 27 February 2008 14:22
		Re: Spice rules ;-) By: Kim Schultz on Wed, 27 February 2008 15:07
		Re: Spice rules ;-) By: Wayne Parham on Wed, 27 February 2008 18:49

Previous Topic:	Mounting Eminence Driver
Next Topic:	midbass horn

Goto Forum:

] [

]

Current Time: Wed Jun 12 02:29:24 CDT 2024