AudioRoundTable.com: Pi Speakers » Wayne, crossover and L-pad confusion

Home » Sponsored » Pi Speakers » Wayne, crossover and L-pad confusion

Tue, 26 February 2008 04:58

Bill Epstein
Messages: 1088
Registered: May 2009
Location: Smoky Mts. USA

Illuminati (2nd Degree)

I went from 12dB to 10. I used 12 originally because I didn't have a .47 cap and 10 with a .33 sounded 'wrong'.

16 and 16 ohms, R1 & R2 with a .47 cap gives much better integration of the drivers. I'm even more amazed now with the quality of the B&C DE-250.

		Wayne, crossover and L-pad confusion By: Bill Epstein on Sun, 24 February 2008 14:48
		Top octave augmentation for compression horn tweeters By: Wayne Parham on Sun, 24 February 2008 16:54
		Re: OK, I'll quit re-inventing the wheel By: Bill Epstein on Sun, 24 February 2008 17:18
		Never! By: Wayne Parham on Sun, 24 February 2008 18:05
		Re: Pi Align strikes again! By: Bill Epstein on Tue, 26 February 2008 04:58
		Re: Upon further review By: Bill Epstein on Tue, 26 February 2008 12:10
		Re: Upon further review By: Wayne Parham on Wed, 27 February 2008 11:55
		What about 16ohm drivers By: Kim Schultz on Tue, 26 February 2008 14:18
		Correction By: Kim Schultz on Wed, 27 February 2008 03:40
		Now with measurements. By: Kim Schultz on Wed, 27 February 2008 07:04
		Re: Now with measurements. By: Wayne Parham on Wed, 27 February 2008 12:48
		Spice rules ;-) By: Kim Schultz on Wed, 27 February 2008 14:03
		Re: Spice rules ;-) By: Wayne Parham on Wed, 27 February 2008 14:22
		Re: Spice rules ;-) By: Kim Schultz on Wed, 27 February 2008 15:07
		Re: Spice rules ;-) By: Wayne Parham on Wed, 27 February 2008 18:49

Previous Topic:	Mounting Eminence Driver
Next Topic:	midbass horn

Goto Forum:

] [

]

Current Time: Fri Nov 22 21:28:41 CST 2024