Wayne Parham Messages: 18786 Registered: January 2001
Illuminati (33rd Degree)
Are you sure you're not looking at the v1 drawings? We used to make the top bevel shorter than the bottom one, and it was 38-7/32" from the front. But the v2 drawing has both bevels cut the same, 36-3/8" from the front on each one. The dimension is only shown along the top edge, but you can see that it lines up with the bottom. This is a non-critical feature and you could use either style, but the new one has bevels cut the same on top and bottom.
Posting Rules
Members
Search
Help
Register
Login
Get a T-Shirt!
