AudioRoundTable.com: Pi Speakers

Home » Sponsored » Pi Speakers » SEP compatibility

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: SEP compatibility [message #51777 is a reply to message #51768]

Mon, 28 January 2008 09:00

spkrman57
Messages: 522
Registered: May 2009

Illuminati (1st Degree)

Dan,

I have used the 4 Pi-pro with great success on 45/2A3/300B/EL34/EL84 single ended amps with less than 7 watts output.

I also have used the JBL 2226J which is a 16 ohm driver with the 8 ohm taps on the SET/SEP amps with great sound due to the increased damping to the output tranny's.

Do a search on this forum and see posts I and others have made in this regard. There is much info to be read concerning this topic!

Hope this helps!

Regards, Ron

Report message to a moderator

[Message index]

		SEP compatibility By: DanTheMan on Fri, 25 January 2008 15:02
		Re: SEP compatibility By: DanTheMan on Fri, 25 January 2008 15:06
		Re: SEP compatibility By: Wayne Parham on Fri, 25 January 2008 16:03
		Re: SEP compatibility By: DanTheMan on Fri, 25 January 2008 16:48
		Re: SEP compatibility By: Wayne Parham on Fri, 25 January 2008 17:51
		Re: SEP compatibility By: DanTheMan on Fri, 25 January 2008 23:26
		How about an SET? By: colinhester on Fri, 25 January 2008 18:29
		2 Pi Towers By: Shane on Fri, 25 January 2008 18:56
		Re: SEP compatibility By: spkrman57 on Mon, 28 January 2008 09:00
		Re: SEP compatibility By: DanTheMan on Mon, 28 January 2008 19:24
		Re: SEP compatibility By: spkrman57 on Tue, 29 January 2008 10:55
		Re: SEP compatibility By: DanTheMan on Tue, 29 January 2008 20:53

Previous Topic:	Pi 12 v2
Next Topic:	Where are enclosure plans?

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Mon Nov 25 14:37:31 CST 2024