AudioRoundTable.com: Pi Speakers » Midhorns to load down to 200 Hz?

Home » Sponsored » Pi Speakers » Midhorns to load down to 200 Hz?

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Midhorns to load down to 200 Hz? [message #51659 is a reply to message #51658]

Fri, 28 December 2007 09:39

Wayne Parham
Messages: 18756
Registered: January 2001

Illuminati (33rd Degree)

Corner loaded, the seven π midhorn is good down to 150Hz. As radiating angle is made larger, low end response suffers. But I see from your photos that your horns are positioned near boundaries and the room is not very large. You may find the boundary reinforcement you have is enough. If not, I'd try a few alternatives in Hornresp and see what you come up with. The description you've given modeled pretty well.

Report message to a moderator

[Message index]

		Midhorns to load down to 200 Hz? By: Peter Krojgaard on Fri, 28 December 2007 06:56
		Re: Midhorns to load down to 200 Hz? By: Wayne Parham on Fri, 28 December 2007 09:39
		Re: Midhorns to load down to 200 Hz? By: Peter Krojgaard on Sat, 29 December 2007 04:07
		Re: Midhorns to load down to 200 Hz? By: Wayne Parham on Sat, 29 December 2007 09:12
		Re: Midhorns to load down to 200 Hz? By: Peter Krojgaard on Sat, 29 December 2007 10:08
		Re: Midhorns to load down to 200 Hz? By: Chris R. on Tue, 15 January 2008 20:23
		Re: Midhorns to load down to 200 Hz? By: Wayne Parham on Wed, 16 January 2008 12:51

Previous Topic:	Stand for Theater 4?
Next Topic:	Quarter wave ported box?

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Mon Sep 02 03:13:24 CDT 2024