AudioRoundTable.com: Pi Speakers » De-ringing my Pi Seven cabinets

Home » Sponsored » Pi Speakers » De-ringing my Pi Seven cabinets

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Midhorn bracing [message #51256 is a reply to message #51255]

Tue, 10 July 2007 10:53

Wayne Parham
Messages: 18711
Registered: January 2001

Illuminati (33rd Degree)

Loosely pack the sides, top and bottom surrounding the flare with insulation:

http://www.pispeakers.com/misc/Rubber_Ball_Brace.jpg

Midhorn packed with insulation and rubber ball brace in place

The picture above doesn't show the gasket, but one is used to seal the access panel. A suitable material for this purpose is PVC sheet rubber, commonly used for shower pans. You can get it at most builder's supply houses and cut it to fit. Makes excellent gasket material.

http://www.pispeakers.com/Basshorn/Cutting_Gasket.jpg

PVC sheet rubber, cut to form a 12π side panel gasket

Report message to a moderator

[Message index]

		De-ringing my Pi Seven cabinets By: Tim Barnes on Mon, 09 July 2007 14:53
		Midhorn bracing By: Wayne Parham on Mon, 09 July 2007 21:19
		Re: Midhorn bracing By: Tim Barnes on Mon, 09 July 2007 23:37
		Re: Midhorn bracing By: Wayne Parham on Tue, 10 July 2007 10:53
		Re: Midhorn bracing By: Tim Barnes on Tue, 10 July 2007 21:38

Previous Topic:	12pi Basshorn , assembled
Next Topic:	Two Pi towers with HiVi RT2C-A Planar transducers...?

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Mon Jun 24 07:14:02 CDT 2024