AudioRoundTable.com: Pi Speakers » anyone tried B&C compression drivers?

Home » Sponsored » Pi Speakers » anyone tried B&C compression drivers?

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: anyone tried B&C compression drivers? [message #51155 is a reply to message #51150]

Wed, 30 May 2007 15:14

Wayne Parham
Messages: 18787
Registered: January 2001

Illuminati (33rd Degree)

The DC resistance of the PSD2002-8 is around 6Ω but the actual impedance never drops below 8Ω through the passband. When mounted on the horn, it's about 10Ω below crossover, between 10Ω and 20Ω in the crossover region, falling to about 8Ω up to about 5kHz and rising steadily above that to around 15Ω at upper cutoff.

Report message to a moderator

[Message index]

		anyone tried B&C compression drivers? By: Matts on Tue, 29 May 2007 09:14
		Re: anyone tried B&C compression drivers? By: Cuppa Joe on Tue, 29 May 2007 10:51
		Re: anyone tried B&C compression drivers? By: Cuppa Joe on Wed, 30 May 2007 08:27
		Re: anyone tried B&C compression drivers? By: Wayne Parham on Tue, 29 May 2007 15:48
		Re: anyone tried B&C compression drivers? By: dB on Tue, 29 May 2007 16:31
		Re: anyone tried B&C compression drivers? By: Wayne Parham on Wed, 30 May 2007 15:14
		Re: thanks.... By: Matts on Wed, 30 May 2007 10:32
		Re: thanks.... By: dB on Wed, 30 May 2007 18:11

Previous Topic:	2Pi tower upgrade
Next Topic:	High Efficiency 15" Woofer Suggestions For 9 Cu Ft Ported Box ??

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Wed Nov 27 09:18:16 CST 2024