Home » Sponsored » Pi Speakers » Mid-horn questions
Re: Mid-horn questions [message #51116 is a reply to message #51115] Wed, 16 May 2007 11:01 Go to previous messageGo to previous message
Wayne Parham is currently offline  Wayne Parham
Messages: 18786
Registered: January 2001
Illuminati (33rd Degree)

The seven π midhorn is designed to use a rear chamber larger than 0.5ft3, which is large enough to act pretty much like there is no rear chamber at all. The resonance of the rear chamber is shifted down out of the passband. This gives a slower more gradual rolloff at low frequencies.

The 9π midhorn (and its midbass horn) both have rear chambers sized specifically to peak near the lower cutoff of the horn. This is called reactance anulling, and it works something like the vent of a bass reflex cabinet. The rear chamber and driver system is tuned to peak at a low frequency where response would otherwise dip.


 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Theater 4's
Next Topic: new wooden horn!
Goto Forum:
  


Current Time: Wed Nov 27 05:32:29 CST 2024

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Miller Audio
Miller Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest