AudioRoundTable.com: Pi Speakers » Midrange Horn Measurement problems

Home » Sponsored » Pi Speakers » Midrange Horn Measurement problems

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: With top and bottom transitions [message #51086 is a reply to message #51085]

Sun, 13 May 2007 09:30

Wayne Parham
Messages: 18709
Registered: January 2001

Illuminati (33rd Degree)

Your horn is starting to look pretty good. That is similar response to my midhorn. If placed in a corner, the walls act like horn extensions. The horn isn't designed to be used outside, but if it were, it would need to be longer and the mouth transition would benefit from a wider exit angle, As it is, indoors, the walls do this for us.

Report message to a moderator

[Message index]

		Midrange Horn Measurement problems By: swett on Fri, 04 May 2007 20:23
		Impulse Response By: swett on Fri, 04 May 2007 20:24
		B&C 8PE21 By: Wayne Parham on Sat, 05 May 2007 17:43
		Re: B&C 8PE21 By: swett on Mon, 07 May 2007 21:54
		Midhorn parameters and what changes what By: Wayne Parham on Tue, 08 May 2007 11:00
		Re: Midhorn parameters and what changes what By: swett on Sat, 12 May 2007 16:02
		With top and bottom transitions By: swett on Sat, 12 May 2007 16:08
		Re: With top and bottom transitions By: swett on Sat, 12 May 2007 16:11
		Re: With top and bottom transitions By: Wayne Parham on Sun, 13 May 2007 09:30
		Re: With better top and bottom transitions By: swett on Sun, 13 May 2007 18:04
		Re: With better top and bottom transitions By: Wayne Parham on Mon, 14 May 2007 11:27

Previous Topic:	Wayne, question about One and Two Pi XO
Next Topic:	h290 bolt size

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Thu Jun 20 06:35:10 CDT 2024