AudioRoundTable.com: Pi Speakers » Midrange Horn Measurement problems

Home » Sponsored » Pi Speakers » Midrange Horn Measurement problems

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: With top and bottom transitions [message #51085 is a reply to message #51084]

Sat, 12 May 2007 16:11

swett
Messages: 47
Registered: May 2009

Baron

Here it is 20 degrees down with no 2" transitions. Its not quite a fair comparison, since this has shorter gating, but usually that makes the graph look a lot better, not worse, so hopefully it should still be useful.

Report message to a moderator

[Message index]

		Midrange Horn Measurement problems By: swett on Fri, 04 May 2007 20:23
		Impulse Response By: swett on Fri, 04 May 2007 20:24
		B&C 8PE21 By: Wayne Parham on Sat, 05 May 2007 17:43
		Re: B&C 8PE21 By: swett on Mon, 07 May 2007 21:54
		Midhorn parameters and what changes what By: Wayne Parham on Tue, 08 May 2007 11:00
		Re: Midhorn parameters and what changes what By: swett on Sat, 12 May 2007 16:02
		With top and bottom transitions By: swett on Sat, 12 May 2007 16:08
		Re: With top and bottom transitions By: swett on Sat, 12 May 2007 16:11
		Re: With top and bottom transitions By: Wayne Parham on Sun, 13 May 2007 09:30
		Re: With better top and bottom transitions By: swett on Sun, 13 May 2007 18:04
		Re: With better top and bottom transitions By: Wayne Parham on Mon, 14 May 2007 11:27

Previous Topic:	Wayne, question about One and Two Pi XO
Next Topic:	h290 bolt size

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Wed Nov 27 20:20:50 CST 2024