AudioRoundTable.com: Pi Speakers » Fitting corner horns into a multi-use room

Home » Sponsored » Pi Speakers » Fitting corner horns into a multi-use room

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: You've got mail! [message #50961 is a reply to message #50960]

Sat, 14 April 2007 22:21

Wayne Parham
Messages: 18789
Registered: January 2001

Illuminati (33rd Degree)

The cabinet for the midhorn is flat on top and bottom, yes. It could be made in other shapes, but that shape works best for this application. When scanning the forum for construction tips, here are a couple posts that may be of interest to you:

Report message to a moderator

[Message index]

		Fitting corner horns into a multi-use room By: Tim Barnes on Fri, 13 April 2007 23:08
		Re: Fitting corner horns into a multi-use room By: Wayne Parham on Sat, 14 April 2007 09:53
		Re: Fitting corner horns into a multi-use room By: Tim Barnes on Sat, 14 April 2007 10:27
		You've got mail! By: Wayne Parham on Sat, 14 April 2007 10:34
		Re: You've got mail! By: Tim Barnes on Sat, 14 April 2007 11:22
		Re: You've got mail! By: Wayne Parham on Sat, 14 April 2007 22:21
		Re: You've got mail! By: Tim Barnes on Sat, 14 April 2007 23:20
		Re: You've got mail! By: Wayne Parham on Sun, 15 April 2007 02:50
		Re: Pi Sevens construction By: Tim Barnes on Sun, 15 April 2007 15:21
		Re: Pi Sevens construction By: Wayne Parham on Sun, 15 April 2007 15:57
		Re: Pi Sevens construction By: Tim Barnes on Sun, 15 April 2007 18:55

Previous Topic:	reccomended amplification power
Next Topic:	Theater 4 crossover

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Fri Nov 29 09:28:35 CST 2024