Home » Sponsored » Pi Speakers » Pi 3-way crossover
Re: Pi 3-way crossover [message #50855 is a reply to message #50853] Tue, 20 March 2007 12:48 Go to previous message
Wayne Parham is currently offline  Wayne Parham
Messages: 18748
Registered: January 2001
Illuminati (33rd Degree)

Just let the one π speakers rolloff naturally, and crossover to the subs around 60Hz. That makes a very seamless transition because the crossover point is so low. You can move the crossover point up some, which will reduce IMD in the Alpha 8 proportional to the amount you've moved the crossover point up. This requires an electronic crossover between mains and subs. But I'd go with the simpler solution, because IMD isn't bad as it is, and to improve it by a significant amount would require an inappropriately high crossover point.


 
Read Message
Read Message
Previous Topic: Midhorn placement question
Next Topic: theater six?
Goto Forum:
  


Current Time: Sat Aug 17 04:52:11 CDT 2024

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Miller Audio
Miller Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest