AudioRoundTable.com: Pi Speakers » Do I treat this as a 6 or 8 ohm driver?

Home » Sponsored » Pi Speakers » Do I treat this as a 6 or 8 ohm driver?

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Driver impedance [message #50424 is a reply to message #50420]

Mon, 25 December 2006 12:12

Bill Epstein
Messages: 1088
Registered: May 2009
Location: Smoky Mts. USA

Illuminati (2nd Degree)

That's what I was thinking, too. Since it'll only see 2 watts, I'll use a first order at 3500.
I gave myself the CD-2 ribbons for Hanukkah:) They should be here this week. I cut all the pieces for a 1/2 cu ft box yesterday with the front baffle rising up another 7" to hold it. The top of the 2123 and the bottom of the ribbon will be just a few inches apart.

Finished the 2226 cabs this morning and can't wait to hear the completed system.
Merry Christmas to you, Wayne, and your family, especially the newest Parham(s).

Report message to a moderator

[Message index]

		Do I treat this as a 6 or 8 ohm driver? By: Bill Epstein on Sat, 23 December 2006 02:28
		Re: Do I treat this as a 6 or 8 ohm driver? By: Paul C. on Sat, 23 December 2006 10:25
		Re: Do I treat this as a 6 or 8 ohm driver? By: Bill Epstein on Sat, 23 December 2006 16:16
		Re: Do I treat this as a 6 or 8 ohm driver? By: Paul C. on Sat, 23 December 2006 16:30
		Driver impedance By: Wayne Parham on Sun, 24 December 2006 17:31
		Re: Driver impedance By: Bill Epstein on Mon, 25 December 2006 12:12
		Re: Driver impedance By: Wayne Parham on Tue, 26 December 2006 09:54
		Re: Do I treat this as a 6 or 8 ohm driver? By: dB on Tue, 26 December 2006 17:50
		Re: Do I treat this as a 6 or 8 ohm driver? By: Wayne Parham on Wed, 27 December 2006 11:10

Previous Topic:	Merry Christmas
Next Topic:	PAS

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Fri Sep 06 17:06:19 CDT 2024