AudioRoundTable.com: Pi Speakers

Home » Sponsored » Pi Speakers » pi 2 towers

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Pic 1 [message #50261 is a reply to message #50257]

Mon, 13 November 2006 18:25

Mario
Messages: 3
Registered: May 2009

Esquire

Thanks Shane, OK I got the idea I was thinking making all the cuts in 45 degrees that way the plywood edges aren't going to be exposed, did you used veneers to cover the edges of the plywood ? one question how did you placed the insulation and if you use screws or finishing nails, what kind of wood do you use to make the crosses, it look to me like a piece of 1 x 14 cut with the jigsaw I was thinking to put the braces all along the inside corners of the box and use carpenters glue in all the joints when finish with the box is going to be tight as cows ????? during fly season lol!!please let me know if I'm correct.. Thanks Mario

Report message to a moderator

[Message index]

		pi 2 towers By: Mario on Mon, 13 November 2006 16:55
		Pic 1 By: Shane on Mon, 13 November 2006 17:59
		Re: Pic 2 By: Shane on Mon, 13 November 2006 18:00
		Re: Pic 1 By: Mario on Mon, 13 November 2006 18:25
		Re: Pic 1 By: Shane on Mon, 13 November 2006 22:11
		Re: Things about stick braces and gluing up cabinets By: Bill Epstein on Tue, 14 November 2006 19:40
		Re: pi 2 towers By: Wayne Parham on Mon, 13 November 2006 22:14

Previous Topic:	Question about a pi speaker kit
Next Topic:	Critical 7pi pro cornerhorn dimensions

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Wed Jul 31 14:18:08 CDT 2024