AudioRoundTable.com: Pi Speakers » Not so "Easy-as-Pie" One-Pi's

Home » Sponsored » Pi Speakers » Not so "Easy-as-Pie" One-Pi's

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

One Pi Crossover Upgrade [message #49822 is a reply to message #49808]

Sun, 06 August 2006 18:04

FredT
Messages: 704
Registered: May 2009

Illuminati (1st Degree)

I've found a crossover parts combination that sounds good to my ears. I wish I could say it's a substantial improvement over the stock parts, but it's really more subtle than that, and I can't say which of the parts changes had the greatest effect. I suspect it's the two ohm resistor in series with the tweeter cap, but I believe the cap upgrade itself might also play a small part. The link below is a picture of the new crossover with a summary of the parts included:

Upgraded One Pi Crossover

Report message to a moderator

[Message index]

		Not so "Easy-as-Pie" One-Pi's By: GarMan on Mon, 24 July 2006 15:27
		Re: Not so "Easy-as-Pie" One-Pi's By: Shane on Mon, 24 July 2006 20:54
		Re: Not so "Easy-as-Pie" One-Pi's By: Norbert on Mon, 24 July 2006 21:39
		Re: Not so "Easy-as-Pie" One-Pi's By: Wayne Parham on Mon, 24 July 2006 23:10
		Q on Tweeter XO By: GarMan on Tue, 25 July 2006 08:14
		Re: Q on Tweeter XO By: Wayne Parham on Tue, 25 July 2006 09:25
		Tweeter Brightness By: FredT on Wed, 02 August 2006 12:28
		One Pi Crossover Upgrade By: FredT on Sun, 06 August 2006 18:04

Previous Topic:	Pics - finished pi stage4
Next Topic:	Sometimes is difficult to get a screw... oops!!!

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sun Feb 16 17:13:46 CST 2025