AudioRoundTable.com: Pi Speakers » Question for FredT re: One-Pi Towers

Home » Sponsored » Pi Speakers » Question for FredT re: One-Pi Towers

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Question for FredT re: One-Pi Towers [message #49710 is a reply to message #49708]

Fri, 14 July 2006 07:29

GarMan
Messages: 960
Registered: May 2009

Illuminati (2nd Degree)

Thanks for the detail Fred. I was considering rebuilding my One-Pi and thought of going with a larger volume. I like the curve that models out with 1 cu ft box and will probably stay with that size.

What difference did you hear, going from 2 to 1.8 to 1.5 and finally to 1.3 cu ft?

Gar.

Report message to a moderator

[Message index]

		Question for FredT re: One-Pi Towers By: GarMan on Wed, 12 July 2006 14:50
		Re: Question for FredT re: One-Pi Towers By: FredT on Thu, 13 July 2006 19:11
		Correction By: FredT on Fri, 14 July 2006 03:25
		Re: Question for FredT re: One-Pi Towers By: GarMan on Fri, 14 July 2006 07:29
		Re: Question for FredT re: One-Pi Towers By: FredT on Fri, 14 July 2006 14:18
		Re: Question for FredT re: One-Pi Towers By: j.luis cruz . on Fri, 14 July 2006 09:59
		Re: Question for FredT re: One-Pi Towers By: FredT on Fri, 14 July 2006 14:15
		Also By: FredT on Fri, 14 July 2006 14:26
		Re: Also By: j.luis cruz . on Fri, 14 July 2006 18:45
		Hey, Wayne By: FredT on Fri, 14 July 2006 14:20
		Re: Hey, Wayne By: Wayne Parham on Sat, 15 July 2006 17:41
		Re: Hey, Wayne By: FredT on Sat, 15 July 2006 19:25
		Re: Hey, Wayne By: Wayne Parham on Sat, 15 July 2006 22:51
		One Cubic Feet? By: GarMan on Mon, 17 July 2006 08:51
		Re: One Cubic Feet? By: Wayne Parham on Mon, 17 July 2006 12:42

Previous Topic:	Are notches required on 12pi?
Next Topic:	Hl10c Heatsink data

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Fri Nov 29 18:02:57 CST 2024