AudioRoundTable.com: Pi Speakers

Home » Sponsored » Pi Speakers » How-to

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: How-to with CAD [message #49671 is a reply to message #49663]

Sun, 25 June 2006 07:20

dB
Messages: 234
Registered: May 2009

Master

Hi,
After ten years working with AutoCad I must admit that it might be a little intimidating at the beginning. But you will get to 3d and all after a few weeks. The best advice is to get a tutorial (maybe from the web) or get a friend to teach you at his or your house/office.
The printing is a little technical, but you will get there. Make a few tests of scale prints with the/your printer for start. Make shure the units are in Imperial or Metrics the way you want.
Take your time.
Regards

Report message to a moderator

[Message index]

		How-to By: derekdun101 on Fri, 23 June 2006 16:14
		12π basshorn subwoofer: How-to By: Wayne Parham on Fri, 23 June 2006 23:39
		Re: How-to with CAD By: dB on Sun, 25 June 2006 07:20

Previous Topic:	Active Crossover - 4Pi Tower?
Next Topic:	Help a newbie! Please?

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Mon Aug 12 21:08:48 CDT 2024