AudioRoundTable.com: Pi Speakers

Home » Sponsored » Pi Speakers » Tower 2

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Tower 2 [message #49587]

Wed, 07 June 2006 09:53

schulzr
Messages: 5
Registered: May 2009

Esquire

After finally finding some time, I've boughten the wood for making the T2's. I'm going with 13/16 Birch for the fronts, sides, and tops and 5/8 MDF for the bottems and rears.

Wayne...any additional suggestions...ie Port hole diameter, etc.?

Report message to a moderator

[Message index]

		Tower 2 By: schulzr on Wed, 07 June 2006 09:53
		Re: Tower 2 By: Wayne Parham on Wed, 07 June 2006 10:55
		Re: Tower 2 By: schulzr on Wed, 07 June 2006 11:55
		Re: Tower 2 By: Wayne Parham on Wed, 07 June 2006 13:32
		Re: Tower 2 By: schulzr on Wed, 07 June 2006 14:07
		Re: Tower 2 By: Wayne Parham on Wed, 07 June 2006 14:17
		Re: Tower 2 By: GarMan on Wed, 07 June 2006 14:35

Previous Topic:	Value of JBL2205's?
Next Topic:	Okay, so Wayne was right.

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Wed Aug 14 12:24:23 CDT 2024