Home » Sponsored » Pi Speakers » Skip Pack -question on coil for Two Towers.
Kit components [message #49513 is a reply to message #49511] Mon, 22 May 2006 13:05 Go to previous messageGo to previous message
Wayne Parham is currently offline  Wayne Parham
Messages: 18787
Registered: January 2001
Illuminati (33rd Degree)

Kits are shipped with a Jantzen 18 guage 0.5mH coil on the midwoofer, and a Solen 10uF cap on the tweeter. The damping resistor across the tweeter is a 16 ohm, 10 watt non-inductive part. There's still room for upgrades, but what we're including in the stock kits are very good components. Originally we were using Dayton caps and generic coils, both of which were pretty good. But I think the parts we're using now are a little better and match the sonics of the drivers very well. Makes for a very good sounding speaker.


 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: theater 4pi boxes- free
Next Topic: Studio .5 pi idea
Goto Forum:
  


Current Time: Sun Nov 24 07:42:29 CST 2024

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Miller Audio
Miller Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest