AudioRoundTable.com: Pi Speakers » Need some speaker advice Wayne (and others)

Home » Sponsored » Pi Speakers » Need some speaker advice Wayne (and others)

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Need some speaker advice Wayne (and others) [message #49337 is a reply to message #49334]

Mon, 17 April 2006 14:05

Wayne Parham
Messages: 18838
Registered: January 2001

Illuminati (33rd Degree)

The three-way crossover is actually a pretty easy load. The first crossover point is first-order and the bass and midhorn impedances tend to damp one another and smooth the impedance. So that works out pretty well. As for the comparison between B&C and JBL, I still tend to prefer JBL but the B&C drivers are very good. Some might prefer them, as may you. But I'm still partial to the JBLs.

Report message to a moderator

[Message index]

		Need some speaker advice Wayne (and others) By: Old Brown Eyes on Mon, 17 April 2006 13:37
		Re: Need some speaker advice Wayne (and others) By: Wayne Parham on Mon, 17 April 2006 14:05
		Re: Need some speaker advice Wayne (and others) By: Pfenning on Tue, 18 April 2006 11:28
		Re: Second this... By: Matts on Tue, 18 April 2006 12:21
		Re: Second this... By: Pfenning on Tue, 18 April 2006 17:08
		Re: Second this... By: Matts on Tue, 18 April 2006 17:59
		Thanks gents, how hard are the cabinets to make? By: Old Brown Eyes on Thu, 20 April 2006 06:29
		Re: Thanks gents, how hard are the cabinets to make? By: Matts on Thu, 20 April 2006 07:19
		Re: Thanks gents, how hard are the cabinets to make? By: Wayne Parham on Thu, 20 April 2006 10:10
		Re: Thanks gents, how hard are the cabinets to make? By: Old Brown Eyes on Thu, 20 April 2006 10:47
		Re: Thanks gents, how hard are the cabinets to make? By: Wayne Parham on Thu, 20 April 2006 22:39
		Re: Thanks gents, how hard are the cabinets to make? By: Spinjack on Fri, 21 April 2006 08:36
		Re: Thanks gents, how hard are the cabinets to make? By: Wayne Parham on Sun, 23 April 2006 22:10
		Re: Thanks gents, how hard are the cabinets to make? By: Russellc on Tue, 25 April 2006 14:31
		Re: Thanks gents, how hard are the cabinets to make? By: Wayne Parham on Tue, 25 April 2006 14:50

Previous Topic:	Compensation circuit for 16-Ohm JBL 2426/2370
Next Topic:	Attenuation for Theatre-3

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sun Mar 02 16:54:33 CST 2025