AudioRoundTable.com: Pi Speakers » Compensation circuit when using active crossover

Home » Sponsored » Pi Speakers » Compensation circuit when using active crossover

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Compensation circuit when using active crossover [message #49185 is a reply to message #49180]

Mon, 27 March 2006 08:32

Wayne Parham
Messages: 18790
Registered: January 2001

Illuminati (33rd Degree)

See if you have the option to configure CD compensation in the active crossover, either by jumper or setup menu. If you can, use it instead of compensation in the passive circuit.

Report message to a moderator

[Message index]

		Compensation circuit when using active crossover By: ccvogel on Sun, 26 March 2006 13:35
		Re: Compensation circuit when using active crossover By: Wayne Parham on Mon, 27 March 2006 08:32
		Re: Compensation circuit when using active crossover By: ccvogel on Mon, 27 March 2006 10:45
		Re: Compensation circuit when using active crossover By: Wayne Parham on Mon, 27 March 2006 11:26
		Re: Compensation circuit when using active crossover By: ccvogel on Mon, 27 March 2006 14:56
		Re: Compensation circuit when using active crossover By: Wayne Parham on Mon, 27 March 2006 15:51
		Thanks By: ccvogel on Mon, 27 March 2006 16:03
		Re: Compensation circuit when using active crossover By: Larry Acklin on Mon, 27 March 2006 09:50
		Re: Compensation circuit when using active crossover By: ccvogel on Mon, 27 March 2006 10:50

Previous Topic:	Parts Express 3.0 cu ft subwoofer cabinet
Next Topic:	mid-horn

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Fri Nov 29 11:25:53 CST 2024