AudioRoundTable.com: Pi Speakers » Compensation circuit when using active crossover

Home » Sponsored » Pi Speakers » Compensation circuit when using active crossover

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Compensation circuit when using active crossover [message #49180]

Sun, 26 March 2006 13:35

ccvogel
Messages: 17
Registered: May 2009

Chancellor

Wayne,

I plan to use an active crossover between the 2226 woofer and 2426/2370 horn. What would your compensation circuit look like if it didn't have to perform the crossover duties? I have your Four-Pi crossover document; do some of the values just go to zero, or is the circuit completely different?

Thanks,
Craig Vogel

Report message to a moderator

[Message index]

		Compensation circuit when using active crossover By: ccvogel on Sun, 26 March 2006 13:35
		Re: Compensation circuit when using active crossover By: Wayne Parham on Mon, 27 March 2006 08:32
		Re: Compensation circuit when using active crossover By: ccvogel on Mon, 27 March 2006 10:45
		Re: Compensation circuit when using active crossover By: Wayne Parham on Mon, 27 March 2006 11:26
		Re: Compensation circuit when using active crossover By: ccvogel on Mon, 27 March 2006 14:56
		Re: Compensation circuit when using active crossover By: Wayne Parham on Mon, 27 March 2006 15:51
		Thanks By: ccvogel on Mon, 27 March 2006 16:03
		Re: Compensation circuit when using active crossover By: Larry Acklin on Mon, 27 March 2006 09:50
		Re: Compensation circuit when using active crossover By: ccvogel on Mon, 27 March 2006 10:50

Previous Topic:	Parts Express 3.0 cu ft subwoofer cabinet
Next Topic:	mid-horn

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Fri Nov 29 11:53:26 CST 2024