Home » Sponsored » Pi Speakers » Kit Buying
Re: Kit Buying [message #49102 is a reply to message #49100] Mon, 13 March 2006 14:17 Go to previous message
Wayne Parham is currently offline  Wayne Parham
Messages: 18727
Registered: January 2001
Illuminati (33rd Degree)

The reason we list them individually is because so many people these days are running an odd number of speakers, like 5.1 for a home theater installation. If we sold everything in pairs, then we'd have to sell 1/2 kit for guys wanting a single. Seemed easier to just list everything qty 1, and if a person wants a stereo pair, then they buy two.

The prices for all the kits are pretty much cost, less than what you'd pay for individual parts from Parts Express or most anywhere else. A Stage four π kit for example costs about $335.00 if you buy everything yourself from Parts Express, the woofer is $185.00, the tweeter is $50.00, the horn flare is $30.00 and the crossover parts add up to about $70.00 ($32.00 for PXB, $12.00 for zobel resistor, $15.00 for Zobel caps, $8.00 for tweeter cable assy and a few bucks for the connector plate and wire). Our kit is $285.00 so you save fifty bucks and don't have to solder everything up, which takes a couple hours to do.


 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: On the fence - Klipsch or Pi?
Next Topic: Crossover Electronics 101 Seminar at GPAF
Goto Forum:
  


Current Time: Wed Jul 17 23:25:29 CDT 2024

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Miller Audio
Miller Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest