AudioRoundTable.com: Pi Speakers » Is mixing 'n matching cabs a bad idea ?

Home » Sponsored » Pi Speakers » Is mixing 'n matching cabs a bad idea ?

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Is mixing 'n matching cabs a bad idea ? [message #48616 is a reply to message #48615]

Sat, 14 January 2006 20:55

Paul C.
Messages: 218
Registered: May 2009

Master

Further, I did some tone analysis of samples of bass guitar sent to me by a fellow here. We found that for all of them, the 2nd harmonic (f x 2) was stronger than the fundamental (f).

As far as this bass spkr project

http://www.geocities.com/SunsetStrip/Bistro/3491/speaker.html

the model number he quotes for the 15" woofer is no longer valid. I ran the numbers and in that cab you can also use the Eminence Delta-15, Delta Pro-15, Gamma-15.

For the 2x12 cab by the same author

http://www.geocities.com/SunsetStrip/Bistro/3491/speaker2.html

You can use Eminence Delta-12's.

Report message to a moderator

[Message index]

		Is mixing 'n matching cabs a bad idea ? By: pieter on Fri, 13 January 2006 04:19
		Re: Is mixing 'n matching cabs a bad idea ? By: Wayne Parham on Fri, 13 January 2006 08:51
		Re: Is mixing 'n matching cabs a bad idea ? By: pieter on Fri, 13 January 2006 09:07
		This is what we did. By: Shane on Fri, 13 January 2006 14:32
		Re: This is what we did. By: pieter on Sat, 14 January 2006 07:13
		Re: This is what we did. By: Shane on Sat, 14 January 2006 10:43
		Re: Is mixing 'n matching cabs a bad idea ? By: jimbop on Sat, 14 January 2006 14:00
		Re: Is mixing 'n matching cabs a bad idea ? By: Paul C. on Sat, 14 January 2006 20:41
		Re: Is mixing 'n matching cabs a bad idea ? By: Paul C. on Sat, 14 January 2006 20:55
		Re: Is mixing 'n matching cabs a bad idea ? By: Matts on Sat, 14 January 2006 23:10
		Re: Is mixing 'n matching cabs a bad idea ? By: Paul C. on Sun, 15 January 2006 18:06
		Re: Is mixing 'n matching cabs a bad idea ? By: Matts on Sun, 15 January 2006 22:07

Previous Topic:	Two pi and Tower two ~ Xover and plans
Next Topic:	Anybody with plans and circuit for 12" based 3 ways?

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Wed Jul 31 08:01:58 CDT 2024