Home » Sponsored » Pi Speakers » TAD TD-4001 Passive Crossover Suggestions Wanted!
Re: TAD TD-4001 Passive Crossover Suggestions Wanted! [message #48592 is a reply to message #48590] Thu, 12 January 2006 12:33 Go to previous messageGo to previous message
spkrman57
Messages: 522
Registered: May 2009
Illuminati (1st Degree)
Use Wayne's 800hz crossover and use the attenuation that gives the same efficiency for both drivers.

Even though you are using a 2" compression driver 800hz is a better crossover point than 500hz/600hz due to the vocals being projected better and it is safer for the compression driver.

I use GP's 399 driver 1.4" and even though it is rated down to 500hz it projects a sweeter sound at 800hz!

Hope this helps.

Ron

 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: mid horn box size?
Next Topic: 6 pi plans
Goto Forum:
  


Current Time: Fri Sep 27 02:24:25 CDT 2024

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Miller Audio
Miller Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest