AudioRoundTable.com: Pi Speakers

Home » Sponsored » Pi Speakers » 2500 hz hump

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: BTW.... [message #48401 is a reply to message #48398]

Thu, 15 December 2005 07:57

Spinjack
Messages: 100
Registered: May 2009

Viscount

Can you not just set the crossover point such that the signal rolls off just before the hump which combined with the hump gives relatively flat total response until the back side of the hump where the total rolloff is now steeper than 12db/oct? You would have to design the system for a steeper rolloff total on the back side of the hump.

(Forgive me is I'm way off base. I'm still rather new at this.)

Report message to a moderator

[Message index]

		2500 hz hump By: Paul C. on Tue, 13 December 2005 16:33
		Re: 2500 hz hump By: Wayne Parham on Wed, 14 December 2005 08:25
		Re: 2500 hz hump By: Paul C. on Wed, 14 December 2005 08:43
		Re: 2500 hz hump By: Spinjack on Wed, 14 December 2005 11:49
		Re: 2500 hz hump By: Wayne Parham on Wed, 14 December 2005 14:10
		Re: 2500 hz hump By: Matts on Wed, 14 December 2005 17:04
		Re: BTW.... By: Matts on Wed, 14 December 2005 17:05
		Re: BTW.... By: Paul C. on Wed, 14 December 2005 20:04
		Re: BTW.... By: Spinjack on Thu, 15 December 2005 07:57
		bad breakup By: ToFo on Fri, 16 December 2005 22:41
		Re: bad breakup By: Spinjack on Mon, 19 December 2005 07:12
		Re: bad breakup By: ToFo on Mon, 19 December 2005 18:04

Previous Topic:	2 Pi volume
Next Topic:	Help....My Girlfriend Needs as Professional!

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Fri Nov 22 05:59:25 CST 2024