AudioRoundTable.com: Pi Speakers

Home » Sponsored » Pi Speakers » 2500 hz hump

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: BTW.... [message #48398 is a reply to message #48396]

Wed, 14 December 2005 20:04

Paul C.
Messages: 218
Registered: May 2009

Master

Yes, they should cross over before that 2000 hz-2500 hump. But even with the crossover rolling them off, they still may have a high peak that interferes with getting an accurate xover.

With some, even with 12 db/oct, this peak makes them unsuitable for the 1600 hz xover freq recommended for the Eminence PSD2002. A 2-way will not work for these, you would have to go much lower, and probably go to a 3-way system.

Report message to a moderator

[Message index]

		2500 hz hump By: Paul C. on Tue, 13 December 2005 16:33
		Re: 2500 hz hump By: Wayne Parham on Wed, 14 December 2005 08:25
		Re: 2500 hz hump By: Paul C. on Wed, 14 December 2005 08:43
		Re: 2500 hz hump By: Spinjack on Wed, 14 December 2005 11:49
		Re: 2500 hz hump By: Wayne Parham on Wed, 14 December 2005 14:10
		Re: 2500 hz hump By: Matts on Wed, 14 December 2005 17:04
		Re: BTW.... By: Matts on Wed, 14 December 2005 17:05
		Re: BTW.... By: Paul C. on Wed, 14 December 2005 20:04
		Re: BTW.... By: Spinjack on Thu, 15 December 2005 07:57
		bad breakup By: ToFo on Fri, 16 December 2005 22:41
		Re: bad breakup By: Spinjack on Mon, 19 December 2005 07:12
		Re: bad breakup By: ToFo on Mon, 19 December 2005 18:04

Previous Topic:	2 Pi volume
Next Topic:	Help....My Girlfriend Needs as Professional!

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Wed Jul 17 18:35:45 CDT 2024