AudioRoundTable.com: Pi Speakers » Help me design a simple and efficient car audio (horn? TL?) sub

Home » Sponsored » Pi Speakers » Help me design a simple and efficient car audio (horn? TL?) sub

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

HL10A in 0.35 to 1.0 cuft [message #47812 is a reply to message #47810]

Tue, 27 September 2005 10:41

Wayne Parham
Messages: 18786
Registered: January 2001

Illuminati (33rd Degree)

I'd go with an Eminence HL10A in a 1.0ft3 box tuned to 30Hz. That will generate strong output to 30Hz. If you need a smaller cabinet, the HL10A can be used in cabinets as small as 0.35ft3. In a small 0.35ft3 cabinet, tune to 40Hz for f3 of 50Hz. You could also make a cabinet sized somewhere in between, say 0.5ft3 tuned to 40Hz (f3 = 40Hz) or 0.75ft3 tuned to 35Hz (f3 = 35Hz).

Report message to a moderator

[Message index]

		Help me design a simple and efficient car audio (horn? TL?) sub By: pieter on Tue, 27 September 2005 09:57
		Low pass By: dwkurfma on Tue, 27 September 2005 10:34
		Thanks By: pieter on Tue, 27 September 2005 11:28
		HL10A in 0.35 to 1.0 cuft By: Wayne Parham on Tue, 27 September 2005 10:41
		Re: HL10A in 0.35 to 1.0 cuft By: pieter on Tue, 27 September 2005 11:26

Previous Topic:	Building 2 Pi Towers - Any Experience?
Next Topic:	OS Waveguides to match 12"

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sun Nov 24 20:41:58 CST 2024