AudioRoundTable.com: Pi Speakers » I just ordered Pi Stage 4's, give me some ideas on bracing, and any other construction tips

Home » Sponsored » Pi Speakers » I just ordered Pi Stage 4's, give me some ideas on bracing, and any other construction tips

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: BB Ply or MDF [message #47722 is a reply to message #47721]

Sat, 10 September 2005 21:13

Matts
Messages: 359
Registered: May 2009

Grand Master

The dust IS the killer with MDF. I don't have any problems with cutting plywood as long as I use the best sawblades for the job- good brands made especially for ply. Here's a pre-finish filler an owner of an architectural restoration store used on my last ply cabs- put it on really thin with a wide putty knife and it *will* sand as smooth as glass with 500 or 600 paper, and take a finish very well. Very good stuff!

Bartley's Filler

Report message to a moderator

[Message index]

		I just ordered Pi Stage 4's, give me some ideas on bracing, and any other construction tips By: Pfenning on Sat, 10 September 2005 07:14
		Re: I just ordered Pi Stage 4's, give me some ideas on bracing, and any other construction tips By: Wayne Parham on Sat, 10 September 2005 08:46
		Re: I just ordered Pi Stage 4's, give me some ideas on bracing, and any other construction tips By: Matts on Sat, 10 September 2005 09:19
		BB Ply or MDF By: GarMan on Sat, 10 September 2005 17:54
		Re: BB Ply or MDF By: Matts on Sat, 10 September 2005 21:13

Previous Topic:	Pi plans info..
Next Topic:	request plans

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sat Nov 30 17:27:33 CST 2024