AudioRoundTable.com: Pi Speakers » HT questions and 7pi.

Home » Sponsored » Pi Speakers » HT questions and 7pi.

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: HT questions and 7pi. [message #47530 is a reply to message #47524]

Sun, 21 August 2005 12:43

Wayne Parham
Messages: 18793
Registered: January 2001

Illuminati (33rd Degree)

What you might want to do is to model the room matehmatically, to get an idea of what you're working with. Then maybe once you get close and have everything built and installed, you can make measurements at several positions to fine tune the installation.

Check out Loudspeakers and Rooms, Part 3. It goes into the treatment of room modes in some detail. The Room Mode Calculator mentioned on page 11 is available here. The article called Loudspeakers and Rooms - Working Together is another good article. It has pretty much the same infromation, but it's presented a little bit differently.

Report message to a moderator

[Message index]

		HT questions and 7pi. By: Kim Schultz on Sat, 20 August 2005 09:08
		Re: HT questions and 7pi. By: Wayne Parham on Sat, 20 August 2005 21:16
		Re: HT questions and 7pi. By: Kim Schultz on Sat, 20 August 2005 23:37
		Re: HT questions and 7pi. By: Wayne Parham on Sun, 21 August 2005 12:43

Previous Topic:	Lowther driver in the midrange horn
Next Topic:	A few pics to share

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Wed Dec 18 07:02:15 CST 2024