AudioRoundTable.com: Pi Speakers » tuning the Alpha 10"

Home » Sponsored » Pi Speakers » tuning the Alpha 10"

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: tuning the Alpha 10" [message #47499 is a reply to message #47498]

Wed, 17 August 2005 11:51

GarMan
Messages: 960
Registered: May 2009

Illuminati (2nd Degree)

I was going to suggest the Delta12LF that's used in the Theatre-3 and use that alignment. I found it to have tighter bass than the Alpha10 and allows for a smaller cabinet. However, the Alpha-10 is a much better choice if you're using a set of 2A3 amps. The "looseness" I found with the Alpha-10, when compared with the Delta12LF, may actually work in your favour when used with such a low-powered amp.

A set of Wayne's corner horns would work well in your case too. However, already having the driver in hand is a pretty good reason.

Gar.

Report message to a moderator

[Message index]

		tuning the Alpha 10" By: Black on Tue, 16 August 2005 08:55
		Re: tuning the Alpha 10" By: Wayne Parham on Tue, 16 August 2005 09:56
		Re: tuning the Alpha 10" By: Black on Tue, 16 August 2005 10:07
		Re: tuning the Alpha 10" By: Wayne Parham on Tue, 16 August 2005 10:32
		that seem easy By: Black on Tue, 16 August 2005 10:33
		4 cu ft @ 35Hz. Isn't that a 2PI Tower? (nt) By: GarMan on Tue, 16 August 2005 14:28
		Pretty close By: Wayne Parham on Tue, 16 August 2005 15:11
		Re: tuning the Alpha 10" By: GarMan on Wed, 17 August 2005 07:33
		Re: tuning the Alpha 10" By: Black on Wed, 17 August 2005 11:31
		Re: tuning the Alpha 10" By: GarMan on Wed, 17 August 2005 11:51

Previous Topic:	What if the "live cabinet" Co's. like Audio Note are right?
Next Topic:	Speaker Voice Coil Cooling System Valve

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Tue Aug 06 23:44:43 CDT 2024