AudioRoundTable.com: Pi Speakers » 2 Pi tower baffles

Home » Sponsored » Pi Speakers » 2 Pi tower baffles

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: 2 Pi tower baffles [message #47378 is a reply to message #47377]

Sun, 24 July 2005 04:47

BillEpstein
Messages: 886
Registered: May 2009

Illuminati (2nd Degree)

I've built several Pi Speakers and always double the baffle. For the way it looks. Perhaps the reinforcement even sounds better.
This, of course, isn't in the Pi Catalogue but is strongly influenced by Wayne's expertise (I have none, just tools).

The hardwood corners left proud is a fine idea I've contemplated in the past and could be embellished by routing a narrow reveal 'tween the board and panel. Go for it!

Report message to a moderator

[Message index]

		2 Pi tower baffles By: Shane on Sun, 24 July 2005 00:23
		Re: 2 Pi tower baffles By: BillEpstein on Sun, 24 July 2005 04:47
		Re: 2 Pi tower baffles By: spkrman57 on Sun, 24 July 2005 04:53
		Re: 2 Pi tower baffles By: Shane on Sun, 24 July 2005 10:24
		Re: 2 Pi tower baffles By: elektratig on Sun, 24 July 2005 08:53
		If your doing something kinda fancy... By: GarlandGarland on Sun, 24 July 2005 10:47
		Re: If your doing something kinda fancy... By: Shane on Sun, 24 July 2005 11:01
		Re: If your doing something kinda fancy... By: Wayne Parham on Sun, 24 July 2005 12:38
		Re: If your doing something kinda fancy... By: GarMan on Mon, 25 July 2005 14:44
		Re: If your doing something kinda fancy... By: Shane on Mon, 25 July 2005 15:16
		Re: If your doing something kinda fancy... By: Matts on Mon, 25 July 2005 20:14
		Finishing BB By: GarMan on Tue, 26 July 2005 09:10
		Re: If your doing something kinda fancy... By: Shane on Mon, 25 July 2005 15:17
		Re:Hey 2XGarland By: BillEpstein on Sun, 24 July 2005 11:42
		Well, the BB I bought was very dense... By: GarlandGarland on Sun, 24 July 2005 19:17
		Re: Well, the BB I bought was very dense... By: Wayne Parham on Sun, 24 July 2005 20:06
		Found a place to get wood! By: Shane on Mon, 25 July 2005 08:24

Previous Topic:	Reflex volume of 4PI Pro - about 2.5 ft^3 ?
Next Topic:	Plans For 1 PI

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Wed Nov 27 09:14:38 CST 2024