AudioRoundTable.com: Pi Speakers

Home » Sponsored » Pi Speakers » 2 pi/7 pi Hybrid

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: 2 pi/7 pi Hybrid [message #46860 is a reply to message #46858]

Mon, 09 May 2005 16:25

Spinjack
Messages: 100
Registered: May 2009

Viscount

I definitely like the looks myself. What I originally intended to do was increase the width of the front panel to match the width of the midhorn and build the high freq horn such that it is in an enclosure that is also the same width. I was also going to build the midhorn/highhorn so that it can be rotated about 15 degrees left or right. I really like that you can't really see any drivers, so there is no ugly grill needed to hide the drivers.

Report message to a moderator

[Message index]

		2 pi/7 pi Hybrid By: Spinjack on Mon, 09 May 2005 14:37
		Re: 2 pi/7 pi Hybrid By: Wayne Parham on Mon, 09 May 2005 16:16
		Re: 2 pi/7 pi Hybrid By: Spinjack on Mon, 09 May 2005 16:25
		Re: 2 pi/7 pi Hybrid By: Wayne Parham on Mon, 09 May 2005 16:38
		Re: 2 pi/7 pi Hybrid By: Spinjack on Mon, 09 May 2005 16:49
		Re: 1 pi/7 pi Hybrid By: GarMan on Mon, 09 May 2005 19:41
		Re: 1 pi/7 pi Hybrid By: Spinjack on Tue, 10 May 2005 10:12

Previous Topic:	Horn Damping Resistor
Next Topic:	JADF'ngQ

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Mon Jul 15 00:36:58 CDT 2024