AudioRoundTable.com: Pi Speakers » Alpha 15 in 8 cubic foot box

Home » Sponsored » Pi Speakers » Alpha 15 in 8 cubic foot box

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Delta 15 in 8 cubic foot box for Model 19 [message #46812 is a reply to message #46811]

Tue, 03 May 2005 17:20

Wayne Parham
Messages: 18748
Registered: January 2001

Illuminati (33rd Degree)

The PSD2002 sounds excellent on the Altec 811 with the same crossover used in the Theater four π speaker. You can really consider the whole kit to be a good second source to Altec components for the Model 19 loudspeaker, but swap the polarity of the HF driver. The cabinet tuning for the woofer isn't bad, but I'd rather see it tuned a little lower for the Delta 15. I'd suggest using a 10" long duct with 2.5" by 11" hole cutout.

Report message to a moderator

[Message index]

		Alpha 15 in 8 cubic foot box By: colinhester on Tue, 03 May 2005 13:49
		Re: Alpha 15 in 8 cubic foot box By: Wayne Parham on Tue, 03 May 2005 15:35
		Re: Alpha 15 in 8 cubic foot box By: colinhester on Tue, 03 May 2005 16:48
		Delta 15 in 8 cubic foot box for Model 19 By: Wayne Parham on Tue, 03 May 2005 17:20
		Re: Alpha 15 in 8 cubic foot box By: Russellc on Tue, 03 May 2005 17:47
		Re: Alpha 15 in 8 cubic foot box By: Russellc on Sat, 07 May 2005 08:29

Previous Topic:	Eight PI as extended midrange system
Next Topic:	GPAF coverage

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Wed Aug 14 00:06:19 CDT 2024