Home » Sponsored » Pi Speakers » Reconing JBL 2245 to 2241
Re: As an aside, [message #46696 is a reply to message #46368] |
Mon, 11 April 2005 10:59 |
DRC
Messages: 169 Registered: May 2009
|
Master |
|
|
Hi Wayne,
Have you tried, or do you know of anyone who has tried, the JBL 2123 in your mid-horn? Im still thinking of how else to approach my TAD1602/2123/TAD2001 system. A lot of the specs are quite similar, although the enclosure volume suggestions are quite different. But I don't know how to relate that to horn use.
Since I'm still on a Mac, I still can't use your (or most other) software to figure things out. Duh.
It would be lovely to get the overall system efficiency up, even if it meant driving the bottom with a larger amp. (Perhaps the AN Kit 4 below and a 45 amp above.) I'm eyeballing the Yamamoto amp Brian Bowdle/Venus HiFi sells. It has such a serious coooool factor, and by all accounts sounds gorgeous. (See, it ain't ALL about business!
|
|
|
|
|
Reconing JBL 2245 to 2241
|
|
|
Sorry - recone to 2240
|
|
|
Re: Sorry - recone to 2240
By: dwkurfma on Thu, 17 February 2005 14:32
|
|
|
Taco Bell
|
|
|
Re: Taco Bell
By: Russellc on Thu, 17 February 2005 19:29
|
|
|
Re: Taco Bell
|
|
|
Re: Taco Bell
By: Russellc on Fri, 18 February 2005 04:52
|
|
|
Re: Taco Bell
By: :mikeo: on Fri, 18 February 2005 05:32
|
|
|
Re: Taco Bell
By: dwkurfma on Sun, 20 February 2005 18:37
|
|
|
Re: Taco Bell
|
|
|
I'd stay with the 2245
|
|
|
2245 cone is too heavy for the suspension...
|
|
|
The 2245 is tuned lower
|
|
|
2245 xmax=.38 2240 xmax=.22
By: :mikeo: on Fri, 18 February 2005 18:09
|
|
|
2240's are not for sub duty
|
|
|
As an aside,
|
|
|
Re: As an aside,
By: Chris R on Sun, 20 February 2005 07:23
|
|
|
Re: As an aside,
|
|
|
Re: As an aside,
By: Chris R on Mon, 21 February 2005 02:25
|
|
|
Re: As an aside,
|
|
|
Re: As an aside,
By: DRC on Mon, 11 April 2005 10:59
|
|
|
Re: As an aside,
|
|
|
Altec 288 on 350hz Edgarhorn from 500hz on up to JBL 075's
|
|
|
Re: Altec 288 on 350hz Edgarhorn from 500hz on up to JBL 075's
|
|
|
Re: Sorry - recone to 2240
|
Goto Forum:
Current Time: Sat Nov 16 02:40:36 CST 2024
|