Home » Sponsored » Pi Speakers » He He....I traded Speakerman right out of his undies!!
Then you should be very happy to try out a 902 driver then! [message #46667 is a reply to message #46659] Wed, 06 April 2005 14:45 Go to previous messageGo to previous message
spkrman57
Messages: 522
Registered: May 2009
Illuminati (1st Degree)
Wayne,
Now that I see the response graph, I understand what I heard while listening to. Bill E. feel free to chime in on this as you were at my house when we did the quick change up on the drivers.

I thought the upper midrange response was high on the 2426 with little top end. When I swapped out the 2426 for the 902, Bill and I both looked at each other and I asked him if the night and day change I heard was the same for him. I believe he agreed with me.

The 902 has that upper HF sparkle that the 2426 was missing. The test was done with Pi crossover modded with .68 ufd caps on the PE 1.6khz hi-pass crossover.

I hope you get apair of 902's soon to put a graph on also!

Thanks Wayne,
Ron


 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Alpha 10 Sub???
Next Topic: L-Pad Configs
Goto Forum:
  


Current Time: Wed Jul 17 03:57:17 CDT 2024

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Miller Audio
Miller Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest