AudioRoundTable.com: Pi Speakers » Loudspeaker phasing: WTF?

Home » Sponsored » Pi Speakers » Loudspeaker phasing: WTF?

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: 1.75" forward of the rear cover [message #46619 is a reply to message #46618]

Thu, 31 March 2005 07:28

Wayne Parham
Messages: 18787
Registered: January 2001

Illuminati (33rd Degree)

Rubycon says the electrodes change in a Black Gate capacitor during the first 30 hours after a signal is applied. Standard aluminum electrolytics are heated and DC is applied during the final phase of manufacturing to restore the aluminum oxide film cracked during winding. The application of voltage actually repairs the cap. So I would expect something like that happens in Black Gates too.

Report message to a moderator

[Message index]

		Loudspeaker phasing: WTF? By: BillEpstein on Tue, 29 March 2005 18:03
		Re: Loudspeaker phasing: WTF? By: ToFo on Tue, 29 March 2005 19:03
		Re: Loudspeaker phasing: WTF? By: Wayne Parham on Tue, 29 March 2005 22:59
		The alternative By: spkrman57 on Wed, 30 March 2005 04:52
		Phase of various crossover slopes By: Wayne Parham on Wed, 30 March 2005 05:31
		location of voice coil in 2426J for alignment pruposes. By: spkrman57 on Wed, 30 March 2005 12:10
		1.75" forward of the rear cover By: Wayne Parham on Wed, 30 March 2005 17:13
		Re: 1.75" forward of the rear cover By: spkrman57 on Thu, 31 March 2005 06:28
		Re: 1.75" forward of the rear cover By: Wayne Parham on Thu, 31 March 2005 07:28
		Re: 1.75" forward of the rear cover By: spkrman57 on Sun, 03 April 2005 09:39
		Play around with this By: GarMan on Wed, 30 March 2005 07:09

Previous Topic:	CABASSE 21M20
Next Topic:	More 7 Pi base questions

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sat Nov 23 16:37:20 CST 2024