AudioRoundTable.com: Pi Speakers » Loudspeaker phasing: WTF?

Home » Sponsored » Pi Speakers » Loudspeaker phasing: WTF?

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: Loudspeaker phasing: WTF? [message #46604 is a reply to message #46603]

Tue, 29 March 2005 19:03

ToFo
Messages: 219
Registered: May 2009

Master

Hi Bill,
That's what those horn sleds and trolleys are for. Some folks make elaborate rails with giant wing nuts to lock it down. I've even seen horn boxes with table legs on the front corners. Then they can slide the horn to compensate for different drivers. I wonder about the mids bouncing between the floor and the horn bottom though.(not to mention the ugliness) Would be simple on the A7 cab. Not sure how much difference it makes.

Thomas

Report message to a moderator

[Message index]

		Loudspeaker phasing: WTF? By: BillEpstein on Tue, 29 March 2005 18:03
		Re: Loudspeaker phasing: WTF? By: ToFo on Tue, 29 March 2005 19:03
		Re: Loudspeaker phasing: WTF? By: Wayne Parham on Tue, 29 March 2005 22:59
		The alternative By: spkrman57 on Wed, 30 March 2005 04:52
		Phase of various crossover slopes By: Wayne Parham on Wed, 30 March 2005 05:31
		location of voice coil in 2426J for alignment pruposes. By: spkrman57 on Wed, 30 March 2005 12:10
		1.75" forward of the rear cover By: Wayne Parham on Wed, 30 March 2005 17:13
		Re: 1.75" forward of the rear cover By: spkrman57 on Thu, 31 March 2005 06:28
		Re: 1.75" forward of the rear cover By: Wayne Parham on Thu, 31 March 2005 07:28
		Re: 1.75" forward of the rear cover By: spkrman57 on Sun, 03 April 2005 09:39
		Play around with this By: GarMan on Wed, 30 March 2005 07:09

Previous Topic:	CABASSE 21M20
Next Topic:	More 7 Pi base questions

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Wed Nov 27 09:59:04 CST 2024