AudioRoundTable.com: Pi Speakers » 2Pi Tower is "sneaky big"! How will it model with.........

Home » Sponsored » Pi Speakers » 2Pi Tower is "sneaky big"! How will it model with.........

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: T/S for 12" driver [message #46522 is a reply to message #46516]

Sun, 20 March 2005 09:33

Wayne Parham
Messages: 18790
Registered: January 2001

Illuminati (33rd Degree)

The Altec 416 has very high Vas and so needs a very large box, between 6 and 18 cubic feet tuned to 30Hz. PiAlign suggests 8.5ft3 for the 416. The Altec 414 should be used in much smaller boxes, like 0.5ft3 to 2.0ft3 tuned to 60Hz. PiAlign suggests 1.5ft3 for the Altec 414.

Report message to a moderator

[Message index]

		2Pi Tower is "sneaky big"! How will it model with......... By: BillEpstein on Thu, 17 March 2005 22:09
		Re: 2Pi Tower is "sneaky big"! How will it model with......... By: Wayne Parham on Fri, 18 March 2005 09:35
		T/S for 12" driver By: spkrman57 on Sun, 20 March 2005 07:35
		Re: T/S for 12" driver By: Wayne Parham on Sun, 20 March 2005 09:33
		Re: T/S for 12" driver By: spkrman57 on Sun, 20 March 2005 10:04

Previous Topic:	Comments on the two π tower
Next Topic:	Sure, I could have just done a search,...

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Fri Nov 29 11:29:14 CST 2024