AudioRoundTable.com: Pi Speakers

Home » Sponsored » Pi Speakers » By-Pass caps?

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

By-Pass caps? [message #46459]

Mon, 07 March 2005 15:16

BillEpstein
Messages: 886
Registered: May 2009

Illuminati (2nd Degree)

I switched around my cross-overs yesterday so the JBL/Altec is crossed at 1600 with a .33 cap on the tweeter instead of 800 Hz with .47. I like the greater contribution to the mid-range of the 2226 but am missing some high's, I think. I don;t have another .47 cap but I do have some nice .1's. I can parallel the .1 with the .33, right? And see if that is brighter?

Report message to a moderator

[Message index]

		By-Pass caps? By: BillEpstein on Mon, 07 March 2005 15:16
		Re: By-Pass caps? By: Wayne Parham on Mon, 07 March 2005 17:30
		Re: Just what the doc ordered By: BillEpstein on Tue, 08 March 2005 19:13
		Re: Do R1 and R2 change with a 16 ohm driver? By: BillEpstein on Wed, 09 March 2005 17:22
		Re: Do R1 and R2 change with a 16 ohm driver? By: Wayne Parham on Wed, 09 March 2005 20:51

Previous Topic:	Anyone north of the boarder handle Eminence?
Next Topic:	Great Plains Audiofest - April 29, 30 and May 1, 2005

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sat Nov 30 22:08:14 CST 2024