AudioRoundTable.com: Pi Speakers » Reconing JBL 2245 to 2241

Home » Sponsored » Pi Speakers » Reconing JBL 2245 to 2241

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: As an aside, [message #46372 is a reply to message #46368]

Mon, 21 February 2005 02:25

Chris R
Messages: 133
Registered: May 2009

Master

Hi Wayne,

Were the mid-horn graphs made using an Alpha10 or some
other driver? Is the horn causing the lower end of the
curve to have higher output, or does that match the Alpha10's
natural curve, as in a 2-Pi also?

Thx, Chris

Report message to a moderator

[Message index]

		Reconing JBL 2245 to 2241 By: spkrman57 on Thu, 17 February 2005 07:28
		Sorry - recone to 2240 By: spkrman57 on Thu, 17 February 2005 08:43
		Re: Sorry - recone to 2240 By: dwkurfma on Thu, 17 February 2005 14:32
		Taco Bell By: Wayne Parham on Thu, 17 February 2005 16:47
		Re: Taco Bell By: Russellc on Thu, 17 February 2005 19:29
		Re: Taco Bell By: Wayne Parham on Thu, 17 February 2005 21:34
		Re: Taco Bell By: Russellc on Fri, 18 February 2005 04:52
		Re: Taco Bell By: :mikeo: on Fri, 18 February 2005 05:32
		Re: Taco Bell By: dwkurfma on Sun, 20 February 2005 18:37
		Re: Taco Bell By: Wayne Parham on Mon, 21 February 2005 07:07
		I'd stay with the 2245 By: Wayne Parham on Thu, 17 February 2005 16:19
		2245 cone is too heavy for the suspension... By: spkrman57 on Fri, 18 February 2005 09:08
		The 2245 is tuned lower By: Wayne Parham on Fri, 18 February 2005 16:54
		2245 xmax=.38 2240 xmax=.22 By: :mikeo: on Fri, 18 February 2005 18:09
		2240's are not for sub duty By: spkrman57 on Sat, 19 February 2005 07:33
		As an aside, By: Wayne Parham on Sun, 20 February 2005 04:27
		Re: As an aside, By: Chris R on Sun, 20 February 2005 07:23
		Re: As an aside, By: Wayne Parham on Sun, 20 February 2005 07:42
		Re: As an aside, By: Chris R on Mon, 21 February 2005 02:25
		Re: As an aside, By: Wayne Parham on Mon, 21 February 2005 07:15
		Re: As an aside, By: DRC on Mon, 11 April 2005 10:59
		Re: As an aside, By: Wayne Parham on Mon, 11 April 2005 11:47
		Altec 288 on 350hz Edgarhorn from 500hz on up to JBL 075's By: spkrman57 on Sun, 20 February 2005 10:47
		Re: Altec 288 on 350hz Edgarhorn from 500hz on up to JBL 075's By: Wayne Parham on Sun, 20 February 2005 10:50
		Re: Sorry - recone to 2240 By: Bill Martinelli on Thu, 17 February 2005 17:38

Previous Topic:	Can I just sandbag it?
Next Topic:	It must be the Auricaps

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sun Aug 04 01:26:43 CDT 2024