AudioRoundTable.com: Pi Speakers » Reconing JBL 2245 to 2241

Home » Sponsored » Pi Speakers » Reconing JBL 2245 to 2241

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Altec 288 on 350hz Edgarhorn from 500hz on up to JBL 075's [message #46369 is a reply to message #46366]

Sun, 20 February 2005 10:47

spkrman57
Messages: 522
Registered: May 2009

Illuminati (1st Degree)

I think the JBL 2240 will reach up to 500hz no problem. I will also be using a 1st order crossover for all three drivers since I am only running 2 watts/chnl.
Ron

Report message to a moderator

[Message index]

		Reconing JBL 2245 to 2241 By: spkrman57 on Thu, 17 February 2005 07:28
		Sorry - recone to 2240 By: spkrman57 on Thu, 17 February 2005 08:43
		Re: Sorry - recone to 2240 By: dwkurfma on Thu, 17 February 2005 14:32
		Taco Bell By: Wayne Parham on Thu, 17 February 2005 16:47
		Re: Taco Bell By: Russellc on Thu, 17 February 2005 19:29
		Re: Taco Bell By: Wayne Parham on Thu, 17 February 2005 21:34
		Re: Taco Bell By: Russellc on Fri, 18 February 2005 04:52
		Re: Taco Bell By: :mikeo: on Fri, 18 February 2005 05:32
		Re: Taco Bell By: dwkurfma on Sun, 20 February 2005 18:37
		Re: Taco Bell By: Wayne Parham on Mon, 21 February 2005 07:07
		I'd stay with the 2245 By: Wayne Parham on Thu, 17 February 2005 16:19
		2245 cone is too heavy for the suspension... By: spkrman57 on Fri, 18 February 2005 09:08
		The 2245 is tuned lower By: Wayne Parham on Fri, 18 February 2005 16:54
		2245 xmax=.38 2240 xmax=.22 By: :mikeo: on Fri, 18 February 2005 18:09
		2240's are not for sub duty By: spkrman57 on Sat, 19 February 2005 07:33
		As an aside, By: Wayne Parham on Sun, 20 February 2005 04:27
		Re: As an aside, By: Chris R on Sun, 20 February 2005 07:23
		Re: As an aside, By: Wayne Parham on Sun, 20 February 2005 07:42
		Re: As an aside, By: Chris R on Mon, 21 February 2005 02:25
		Re: As an aside, By: Wayne Parham on Mon, 21 February 2005 07:15
		Re: As an aside, By: DRC on Mon, 11 April 2005 10:59
		Re: As an aside, By: Wayne Parham on Mon, 11 April 2005 11:47
		Altec 288 on 350hz Edgarhorn from 500hz on up to JBL 075's By: spkrman57 on Sun, 20 February 2005 10:47
		Re: Altec 288 on 350hz Edgarhorn from 500hz on up to JBL 075's By: Wayne Parham on Sun, 20 February 2005 10:50
		Re: Sorry - recone to 2240 By: Bill Martinelli on Thu, 17 February 2005 17:38

Previous Topic:	Can I just sandbag it?
Next Topic:	It must be the Auricaps

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Mon Sep 09 22:23:05 CDT 2024