Home » Sponsored » Pi Speakers » Reconing JBL 2245 to 2241
2245 cone is too heavy for the suspension... [message #46354 is a reply to message #46344] Fri, 18 February 2005 09:08 Go to previous messageGo to previous message
spkrman57
Messages: 522
Registered: May 2009
Illuminati (1st Degree)
Wayne,
I am willing to trade the bottom end extension for the higher SPL. Also, I had 2245's in the past and there are issues with them that I don't want to deal with.

I have a pair of cabinets that are 8.8 cu ft and tuned for 28 hz. I know that will leave me somewhere around 40hz for bottom end which is okay for me. I never had a problem with my 2226's which had about the same bottom end response.

And the 98db efficiency beats out the 95db of the 2245's. I will be running Yamamoto 45 SET amp for 2 watts/chnl.

Also, if I ever get some Edgar sub horns, I will be set for drivers as the specs are excellent for a sub-horn driver.
Ron

 
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Read Message
Previous Topic: Can I just sandbag it?
Next Topic: It must be the Auricaps
Goto Forum:
  


Current Time: Mon Jun 10 19:13:48 CDT 2024

Sponsoring Organizations

DIY Audio Projects
DIY Audio Projects
OddWatt Audio
OddWatt Audio
Pi Speakers
Pi Speakers
Prosound Shootout
Prosound Shootout
Smith & Larson Audio
Smith & Larson Audio
Tubes For Amps
TubesForAmps.com

Lone Star Audiofest