AudioRoundTable.com: Pi Speakers

Home » Sponsored » Pi Speakers » 2 Pi almost done

Show: Today's Messages :: Navigator :: Polls
E-mail to friend

Re: added pic [message #46233 is a reply to message #46230]

Wed, 02 February 2005 09:28

Matts
Messages: 359
Registered: May 2009

Grand Master

be careful staining birch- it does not take stains well and frequently looks very smeared. Try whatever you're planning on a piece of scrap wood before you do it to the speakers. I built mine out of Baltic Birch and just put an oil finish on them after sanding them very smooth. It looks great. I used Tried & True Varnish/Linseed Oil finish, topped off with the Beeswax version. There are several good oil products out there. Some shellac may add a nice touch, too.

Report message to a moderator

[Message index]

		2 Pi almost done By: fredd on Tue, 01 February 2005 20:43
		added pic By: fredd on Tue, 01 February 2005 21:01
		Re: added pic By: Wayne Parham on Wed, 02 February 2005 03:42
		Re: added pic By: fredd on Wed, 02 February 2005 06:36
		Re: added pic By: Wayne Parham on Wed, 02 February 2005 06:47
		Getting there... By: fredd on Wed, 02 February 2005 21:24
		Re: Getting there... By: Wayne Parham on Thu, 03 February 2005 04:12
		Re: added pic By: Matts on Wed, 02 February 2005 09:28

Previous Topic:	1Pi and 2Pi OLD plans
Next Topic:	Stoetkit arrived!

Goto Forum:

-=] Back to Top [=-

[ Syndicate this forum (XML) ] [

] [

]

Current Time: Sun Jul 14 16:28:29 CDT 2024